How to use your QuickShot joystick in Windows 95

In Windows 95, joystick drivers are included. Once you click on the "Control Panel", "Joystick" icon will appear under the "Control Panel" window. If you don't have the "Joystick" icon, follow the instructions on "Joystick" icon installation. Caution, for the user who uses the QS-201, don't install the calibration software that comes with the joystick; otherwise, please remove it by following the procedure on the QS-201. The same goes for the QS-205.

"Joystick" icon installation (Only if you are missing the Joystick icon in the Control Panel for Windows 95)

• Goto "Control Panel"
• Click on "Add New Hardware"
• Click "Next"
• Answer "No" for the question, then hit "Next"
• Select "Sound, video, and game controller", then click "Next"
• For Manufacturer, select "Microsoft"
• For Model, select "Gameport Joystick
• Click "Next" until "Finish"
• Restart your computer is necessary
• "Joystick" icon should be in the "Control Panel"
• Selection of different type of joystick is in the "Joystick" icon

Following are the types of joystick selections in Windows 95 according to the joystick model we have.

QuickShot Model		Windows 95 Joystick Type Selection
QS-123A	Warrior 5	2-axis, 2-button
QS-113A	Classic 5	2-axis, 2-button
QS-172	Raider 5	2-axis, 2-button
QS-209	Skyhawk	2-axis, 2-button
QS-203A	Avenger Pro	3-axis, 2-button, /CH Flight Stick
QS-206	Skymaster	2-axis, 4-button
(If the mode switch is on OFF)
QS-205	Interceptor	3-axis, 4-button
QS-201	Super Warrior	3-axis, 4-button
QS-216	Strato Warrior	3-axis, 4-button
QS-206	Skymaster	3-axis, 4-button
(If the mode switch is on ON)
QS-206	Skymaster	Thrustmaster Flight Control System
(If the mode switch is on HAT)
QS-191G	Starfighter	2-button gamepad
QS-212	Commandpad Pro	4-button gamepad
QS-217	Commandpad	4-button gamepad
QS-151A	AeroAce 5	2-button flight yoke

QS-201

• Click on "Start"
• Select "Settings"
• Select "Control Panel"
• Click on "Multimedia" icon
• Click on "Advanced" on the top-right hand corner of the screen
• Select on "Joystick Device", then click twice on it
• Highlight "Joystick for the Multimedia system"
• Click on "Properties"
• Click on "Remove"
• Restart your computer

After removing the "QuickShot Joystick" icon, install the "Joystick" icon is required.

QS-206

Mode Switch	Windows 95 Joystick Selection
"OFF"	2-axis, 4-button
"THROTTLE"	3-axis, 4-button
"HAT"	Thrustmaster Flight Control System

QS-202

For "Thrustmaster Flight Control System", please program the joystick into the following modes on DOS prompt inside the Cockpit Manager:

STICK	Analog	-led off
HAT	Analog	-led off
THROTTLE	Digital	-led on
FIREBTNS	Joystick	-led off

*Buttons on the Throttle side are still programmable in Cockpit Manager.

For 3-axis, 4-button, simply put the joystick onto the Normal mode on DOS prompt:

STICK	Analog	-led off
HAT	Digital	-led on
THROTTLE	Analog	-led off
FIREBTNS	Joystick	-led off

What's New  About Us  Contact Us  Marketing  Support
Game Controllers  Multimedia Speakers  Multimedia Accessories  
Pointing Devices  Midi Keyboards  GenX Website  Home

No Frames Version

© QuickShot Technology, Inc.
info@qticom.isp.net